Exposed aggregate driveway cost in Perth

Per square metre
$170
$125 to $210, laid, including GST
A typical driveway, about 40 m²
$6,800
$5,050 to $9,450
The crossover on top
$1,400 to $3,800
plus the council's fee, less its subsidy

Perth averages published by WhatsTheDamage, verified November 2026, and The Quote Yard, October 2026. Only a quote after a site visit is a price for your block

Book one site visit

What exposed aggregate costs per square metre in Perth

Exposed aggregate sits in the middle of the decorative finishes. Perth concreters pour it so often that the price is competitive with the eastern states, and the spread between a low and a high quote comes from the stone, the prep and the access rather than the finish itself

FinishLowTypicalHigh
Plain concrete slab$79$115$160
Coloured concrete$100$145$210
Exposed aggregate$125$170$210
Stamped or stencilled$125$165$210
Liquid limestone, honed, before sealing$95$115 to $130$150

Per square metre, laid, including GST. WhatsTheDamage, Perth concreting guide, verified November 2026; the liquid limestone row is The Quote Yard's WA guide, September 2026, which prices it before the first seal

What a whole driveway comes to

A single driveway on a new Perth block is about 40 square metres, and that is the size the published totals are built on

About 40 m²LowTypicalHigh
Plain concrete$2,725$4,725$6,300
Exposed aggregate$5,050$6,800$9,450

WhatsTheDamage, Perth concreting guide, verified November 2026, including GST

What moves the price

  • Taking out old concrete. $32 to $105 a square metre including disposal, $63 typical, so $1,280 to $4,200 on a 40 m² driveway. A new build has none of this
  • The base. Excavation and compaction run $25 to $55 a square metre where the sand pad is not already right, and a limestone or clay pocket under the sand adds hand digging
  • Access. A truck that cannot reach the pour means a concrete pump, and a pump is a line on the quote. Ask whether the price assumes the truck gets to the slab
  • The stone. The aggregate chosen, its size and where it comes from move the per metre rate inside the range above, and a lighter stone keeps the surface cooler
  • Sealing. Exposed aggregate is resealed every three to five years; decorative sealing runs $12 to $28 a square metre when it is done
  • The crossover. The part in the road reserve is built to the council's specification, costs $1,400 to $3,800, carries an application fee, and on a first crossover the council pays part of it back

Removal and typical figures from WhatsTheDamage, November 2026; base, sealing and crossover construction from The Quote Yard, 2026

Council crossover fees and subsidies around Perth

A crossover sits in the road reserve, so it is built to the council's drawing and needs its approval. A first crossover on a new block is subsidised: WA regulations have the local government bear half the cost of a standard first crossover, and each council caps and conditions that its own way. Two of them do not list exposed aggregate as a material they pay towards, which is worth knowing before the pour

CouncilApplication feeFirst crossover subsidyConditions
City of WannerooNot published online50%, up to $1,392.44Concrete or brick paving only. Statutory declaration and itemised receipt, built within six months of the declaration. Second or rebuilt crossovers are not eligible
City of RockinghamNot published online50% at a 3.5 m widthAt a square metre rate the City sets each year. The owner applies after construction; about six weeks to inspect and pay
City of ArmadaleNot published online50%, up to $400A registered contractor builds it. Plain or coloured concrete, brick or block paving, asphalt with approval. Exposed aggregate is not on the list. Lodge at least seven working days before work starts
City of GosnellsNot published online50% of a standard first crossingApply within six months of completion
City of Canning$594Ask the CityThe 2026/27 application fee
City of Perth$115Ask the CityNon-refundable
Town of Cottesloe$179Ask the Town
Town of Mosman Park$118Ask the TownFrom 1 July 2025

Each council's own crossover page or information sheet, read November 2026; the statutory half is the Shire of Capel's crossover policy quoting the regulation. Where a fee or a subsidy is not in the council's published material the table says so, and the council's engineering desk gives it in a phone call

On a main road frontage the approver is Main Roads WA, not the council. Either way the crossover is a separate approval from the house, so ask your concreter to lodge it or confirm who does

Why Perth pours pale finishes

Surface temperature is the reason exposed aggregate and liquid limestone took hold here. A pale finish stays cooler underfoot than dark grey concrete in a Perth February and keeps its grip when wet, which is why both run from the driveway to the pool surround. Exposed aggregate wears harder and hides sand and dust, and is coarser on bare feet; liquid limestone is smoother and paler, marks more easily, and is resealed every two to four years against three to five

The Quote Yard, Perth concreter and liquid limestone guides, 2026

Questions people ask before a driveway quote

Do I need council approval for a driveway in Perth?

The approval is for the crossover, the part between your boundary and the road. The council sets its width and specification and some charge an application fee. On a first crossover the council pays part of it back, with the conditions in the table above

Is there a licence for concreters in WA?

No. Western Australia has no concreter's licence, and a driveway is not builder's work, so nobody can be licensed for it. What you can ask for is an ABN, public liability insurance and recent driveways you can look at

How much does a crossover cost on its own?

$1,400 to $3,800 to build, plus the council's application fee where it charges one, less the first crossover subsidy where you qualify. Armadale does not list exposed aggregate among the materials it subsidises, so there the crossover is often poured plain or brick paved

What size is a normal driveway?

About 40 square metres on a single frontage, which is what the published totals use. A double driveway or a run to a rear garage is priced by the metre from the table above

How does Bareblock fit in?

You tell us the job once, we book one site visit with the concreter who holds your area, and the quote comes from the person who stood on your block. The concreter pays Bareblock for the visit we book; you pay nothing

One site visit, one quote, from the concreter for your area

Tell us the job and we text you to pick a day. The concreter measures the driveway and the crossover on your block and quotes the lot

  • One concreter, matched to your suburb
  • The visit booked by text, into their calendar
  • Free for you. The concreter pays Bareblock for the visit

Where and what

Step 1 of 2

A WA postcode and a line about the job is all we need

A name, a mobile we can text and an email, please

Thanks, there

A text is on its way to line up the site visit. Reply to it any time to pick a day that suits, and the quote comes from the concreter who visits